Technical article: What should I do if the UV lamp of the UV flatbed printer does not turn on?
UV flatbed printer, UV printer, UV printer manufacturer
What should I do if the UV lamp of the UV flatbed printer does not turn on? The UV lamp is used to directly cure the printing effect.
1. What should I do if the UV lamp of the UV flatbed printer does not turn on?
1. Circuit problem
A. The LED lamp itself has a circuit problem. High-power LED lights require higher current. If there are defects in the design, the LED lights will burn out during use, resulting in scrap.
B, LED lights and external circuit problems. Part of the circuit system of the LED lamp is mixed with the board circuit of the UV printer head, causing local voltage and current to rise, causing a short circuit and burning the circuit.
2. UV printer LED lamp problem
A. The quality is not good enough, and the service life is not reached, so it is scrapped ahead of time.
B, human operation error, LED light protection device is not added, resulting in collision damage.
C. There is a problem with the protection device, and the cooling system does not work normally, which causes the LED lamp of the UV printer to have too high heat and cause burnout.
3. Summary of UV printer manufacturer Dacen
The above is the whole content of "Technology: What should I do if the UV lamp of UV flatbed printer is not on?", I hope to help you.
