DACEN A1 UV Silicone Printer for Batch Product Customization
The DACEN A1 UV Silicone Printer is a production-ready digital printing system developed for full-color decoration, short-run customization and repeatable batch printing on silicone products. Instead of promising that "any material" prints perfectly, DACEN focuses on what silicone buyers actually need: verified material compatibility, documented pretreatment routes, custom fixtures for flexible parts, and white / color / varnish layering in one controlled workflow. Built around A1 batch production and product-specific tooling, it helps silicone factories, OEM/ODM partners and custom print-service providers replace screen and pad printing for mixed, personalized and frequently changing orders. Request a documented sample test on your own product before you confirm a machine configuration.
Core Benefits
Application-Specific Silicone Printing
Silicone formulations, surface additives and release agents vary widely, and standard UV inks do not adhere equally to every grade. DACEN evaluates your actual product and recommends a suitable cleaning, pretreatment and printing process rather than assuming one route fits all. This turns an uncertain purchase into a validated one, reducing the risk of buying a machine that cannot hold ink on your specific silicone.
A1 Batch Printing with Custom Fixtures
The A1 flatbed and product-specific fixtures let you hold multiple silicone parts securely and maintain repeatable positioning between batches. For strap, wristband and accessory production, batch tooling is what converts a "large print area" into real throughput. DACEN designs fixtures around your product geometry, improving loading speed, alignment consistency and unit output per cycle for bulk and repeat orders.
White, Color and Varnish in One Workflow
Create opaque white underlayers, detailed full-color graphics and optional gloss or texture effects in one controlled multi-layer workflow. Dark and transparent silicone needs a reliable white base to make colors read correctly; a single-pass color-only process rarely delivers that. DACEN structures white, color and varnish layers so decoration stays vivid and consistent across production runs.
Faster Changeovers for Mixed Orders
Switch artwork without creating new screens or plates, which makes the system well suited to short runs, personalized products and frequent design changes. Screen and pad printing add plate-making, color-matching and setup cost every time a design changes - the biggest hidden cost in short, mixed orders. Digital UV changeover reduces that setup burden and shortens the path from approved sample to shipped product.
Testing, Training and Production Support
From sample testing and fixture design to installation, operator training and remote technical support, the DACEN solution is configured around your production requirements rather than sold as a bare machine. For project buyers and OEM/ODM partners, this de-risks commissioning and shortens the ramp to stable output. Support scope, warranty and spare-parts terms are stated clearly on your quotation.
Factory-Direct, Documented Supply
As a manufacturer and OEM/ODM partner, DACEN supplies factory-direct with datasheet, specification and test-report documentation available to support internal engineering review and procurement approval. Buyers can compare specifications, request test reports and confirm configuration before placing bulk orders - a more accountable path than pages built on adjectives alone.
Customer Pain Points
Ink adhesion varies between silicone formulations.
Buyers who have tried standard UV printing on silicone often see ink lift or peel because the formulation, additives or release agents block adhesion. Specifications alone cannot predict this.
How DACEN solves it: documented sample testing on your actual product with cleaned, untreated and primer-treated routes.
Prints crack when the product is bent or stretched.
Silicone straps, wristbands and swim caps flex in use, and rigid or over-thick ink layers can crack. This is a durability question, not a resolution question.
How DACEN solves it: bending and stretching tests on the real product, tuning ink flexibility, thickness and pretreatment.
Flexible silicone parts are hard to position consistently.
Soft parts shift under vacuum and during loading, causing misalignment across a batch and scrap.
How DACEN solves it: product-specific fixtures and optional camera-assisted positioning that hold parts repeatably and speed loading.
Send Your Product for fixture design.
Screen and pad printing slow down short, mixed orders.
Every color and every design change means new plates, screens and setup - costly for short runs, personalized names and multi-SKU work.
How DACEN solves it: plate-free digital changeover and variable-data printing from one production file.
Get Machine Configuration for your order mix.
Technical Specifications
| Parameter | Specification | |
|
Machine model |
DG-9070 |
|
|
Print size |
900mm×700mm |
|
|
Print brand |
TOSHIBA CE4M |
|
|
Print quantity |
2 to 5 pcs |
|
|
Ink configuration |
C, M, Y, K, W, V |
|
|
Print Height |
0-400mm |
|
|
Curing system |
LED UV Lamp |
|
|
Supportable format |
TIFF,BMP,EPS,JPEG |
|
|
Cleaning system |
Positive pressure cleaning |
|
|
Interface |
USB3.0 |
|
|
Power requirement |
AC220V 1 Phase 50/60Hz |
|
|
Environment requirement |
Temperature |
20-30℃ |
|
Humidity |
30%~70% |
|
|
Dust |
Office environment |
|
|
Machine size |
2040mm (L) *1360mm(W) *1300mm (H) |
|
|
Certificate |
CE |
|
Applications
Silicone Watch Straps
strap factories, accessory OEMs Print multi-color straps with brand logos, fine text and gradients, and hold multiple straps per cycle with batch fixtures. Bending durability is validated on the real product so decoration survives daily flexing.
Silicone Wristbands
promotional-gift and event suppliers
Ideal for event and promotional orders where each band may carry a different name, number or QR code. White underbase plus variable data lets you personalize at batch scale with fast changeovers.
Configure for Personalized Batches.
Silicone Swim Caps
sporting-goods factories, sports brands Decorate large-area graphics on flexible, curved surfaces used in water. Because caps stretch and see wet conditions, DACEN validates the process on your actual product rather than promising permanent adhesion.
Silicone Phone Cases
3C accessory factories, custom-print providers Produce full-color designs and opaque white on dark cases for small-batch, multi-SKU customization. Camera-assisted positioning or dedicated fixtures keep alignment tight across designs.
Get a Multi-SKU Configuration.
Silicone Toys & Accessories
toy and soft-goods factories
Handle irregular, multi-color molded parts at low-to-medium volume with fixtures that secure flexible shapes. Product-safety requirements are determined by your destination market. Image suggestion: molded toys in a fixture.
Discuss a Molded-Part Project.
Industrial Silicone Components
seal and component manufacturers
Mark logos, identification, serial numbers, orientation marks and QR codes on seals and molded functional parts. Variable data suits traceability and identification at scale. Image suggestion: marked seals/components.
How DACEN Verifies Print Adhesion and Durability
Quality on silicone is proven, not asserted. Rather than claiming "wear-resistant" or "alcohol-resistant" without conditions, DACEN documents each test with the substrate, silicone type, pretreatment, ink and curing settings so results are meaningful and repeatable. A typical validation covers cross-hatch adhesion, tape peel, alcohol rub cycles, dry and wet abrasion, repeated bending or stretching, scratch resistance, ΔE color difference, white-ink opacity, print positioning accuracy and nozzle-check pass rate - each recorded against the actual product. On the production side, a controlled quality flow runs from incoming inspection through assembly, printhead calibration, table leveling, ink-path checks, continuous print testing and final inspection before export-ready packing. This evidence-first approach lets internal engineering and QC teams evaluate reliability before a bulk order and supports project acceptance on delivery. Certification documents (such as CE and relevant ink SDS) and test reports can be provided upon request; final compliance status should be confirmed before publishing, and reported performance depends on the confirmed model and validated process.
DACEN Factory-Direct Manufacturing and Project Supply
As a factory-direct DACEN manufacturer and OEM/ODM partner, DACEN supplies silicone UV printing systems configured for project-based procurement rather than one-off retail sales. Machines are assembled, calibrated, aged and continuously print-tested before export-ready packing, and buyers can align specifications, fixtures and ink configuration with engineers before production begins. For distributors, contractors and OEM buyers, this manufacturer-direct model means clearer specifications, accountable quality control and a single point of contact for configuration, documentation and after-sales - helping simplify sourcing and support repeat orders and long-term supply programs. Fixture design, machine language, branding and packaging can be customized for OEM/ODM projects, and lead time, MOQ and packaging are confirmed transparently on the quotation. Rather than a single factory photo, DACEN can share the real assembly, calibration, continuous-test and packing flow so project buyers can assess supply reliability before committing.
FAQ
Q: What is the DACEN A1 UV Silicone Printer?
A: It is an industrial A1-format UV LED flatbed system configured as a direct-to-object silicone printer, for full-color decoration, short-run customization and repeatable batch printing on silicone products such as straps, wristbands, swim caps, phone cases, toys and molded components - supplied factory-direct with OEM/ODM support.
Q: What applications is it suitable for?
A: It suits silicone watch straps, wristbands, swim caps, phone cases, molded toys, industrial seals and functional components - typically short-run, multi-SKU, multi-color and personalized orders that are inefficient for screen or pad printing. DACEN can recommend a configuration and fixture based on your specific products.
Q: Can this printer print directly on every type of silicone?
A: No. Silicone formulations, additives and release agents vary, so DACEN recommends testing the actual product to determine whether cleaning, primer or surface treatment is required. This is confirmed by documented sample testing before configuration rather than assumed.
Q: Is primer required before printing?
A: It depends on the silicone formulation and required durability. DACEN can test untreated, cleaned and primer-treated samples and then recommend the process. The chosen route is recorded so your production can be repeated reliably.
Q: What technical specifications are available?
A: Core fields include print area, object height, printhead configuration, ink configuration (CMYK + white + varnish), positioning, curing and batch capacity. Some values are confirmed on the quotation and datasheet; final data is verified by factory test report before publishing.
Q:Are competitor benchmark values used as confirmed data?
A:No. Where our page references ranges from other machines, they are marked as competitor benchmark or industry reference only, for target-setting. DACEN confirmed values are stated separately on the datasheet and quotation.
Q: How should I confirm final specifications?
A: Send your product, material and output target to receive a configuration proposal, then confirm the final specification against the DACEN datasheet and factory test report. Test reports and sample results are available upon request.
Q: Do you support OEM/ODM and custom packaging?
A: Yes. DACEN supports OEM/ODM machine configuration, custom batch fixtures, machine language, branding and export-ready custom packaging. Share your project requirements to receive an OEM/ODM proposal.
Q: Can I request samples, and what is the sample policy?
A: Yes. Send your silicone product, artwork, expected effect and durability requirements for a documented print and adhesion test. Free or paid testing terms and the sample-return process are confirmed with your DACEN sales contact.
Q: What are the MOQ and lead time?
A: MOQ and lead time depend on machine configuration, fixtures and order scope and are stated on your quotation. Standard machines, custom machines, fixtures and spare parts each have their own lead-time range - final data to be confirmed before order.
Q: Can you provide datasheets or test reports?
A: Yes. Datasheet, specification and adhesion/durability test-report documentation are available upon request to support engineering review and bulk-order approval. Reported performance depends on the confirmed model and validated process.
Q: How do I choose the right model and confirm compatibility?
A: Provide product dimensions, silicone grade, surface type (flat, curved or flexible), daily output target and number of designs. DACEN will recommend the model, ink configuration and fixture, and confirm compatibility before quotation.
18. Bottom CTA
Get a 2513 UV Printer Configuration Built Around Your Production
Tell DACEN what you need to print, your maximum material size, daily quantity and required visual effect. A technical sales engineer can review the application and prepare a proposed Epson I3200 configuration, technical specification, lead-time estimate and factory quotation. Uploading a material image or artwork will help improve the accuracy of the recommendation.
Flatbed UV Printer Introduction
Colors+White+Varnish(CMYK+W+V)
Direct printing that can accommodate 40cm high materials
Application
Application material:
Printed materials could be: glass, silicone, ceiling, aluminum sheet, wood board, door sheet, metal panel, billboard, acrylic panel, glass, paper board, foam board, PVC expansion board, corrugated cardboard; flexible materials such as PVC, canvas,cloth, carpet, sticky note, reflective film, leather etc.
Application Areas:
Decoration industry, glass industry, sign industry, exhibition industry, rigid paperboard packing industry, leather, textile printing industry, art ware industry, furniture industry etc.Our machine can print material includes rigid sheets, such as glass, metal, acrylic, PVC board, MDF, and the flexible material,like film, leather, canvas, wall paper, ceiling paper etc.
About after-sales
1
One year warranty
Our printers come with a 1 year warranty, during which time we will repair and replace any damaged part, except the print head.
2
Technical support for life
We have built up a team of professional engineers and we will provide you with a lifetime of service. Once purchased, you can consult our technical team with any questions you may have about the machine during use and we will help you. Valid for life.
3
Design fixtures for your products
If you require, we can also design a print fixture specifically for your product. This can greatly help you to improve your printing efficiency.
4
On-site installation,One-to-one training
Once you have received your machine, you can choose to have one of our engineers come and install the machine for you and train your staff in its correct use, if you require.
Our Exhibition
Hot Tags: a1 uv silicone printer, China, manufacturers, suppliers, price
