What should I pay attention to when buying a new UV flatbed printer nozzle? The print head is a consumable product. In the process of using the UV flatbed printer, you may encounter the situation of buying a new print head and replacing it with a new print head. This article will talk about the matters to be noted after buying a new print head.
One. What should I pay attention to when buying a new UV flatbed printer nozzle?
1. The nozzles of the UV printer are very fragile, so they should not be bumped and should be properly protected. Because its surface layer is a piece of aluminum, the inner layer is coated with a crystal oscillator and a small ink tube. It will be dented, deformed, or even cracked when touched, and the nozzle will be finished.
2. The newly installed nozzle will have air, and it cannot print normally once it is installed. The ink tube of the UV printer can only discharge ink normally after the air in the head is discharged.
3. When installing the UV printer nozzle, cut off the power and install it in place. After the installation is complete, gently push the trolley with your hands to move it left and right to check whether the trolley is stable. Don't turn on the power when it is installed. If the head is not in place, it will easily break the front of the car.
4. When connecting the cable, do not bring ink, make sure that it is in good contact with the socket, and do not touch the feet, otherwise it will cause the spraying to short-circuit and burn out.
Two. Summary of UV flatbed printers manufacturer Dacen
UV flatbed printer nozzles are easily broken parts. There are many types of nozzles. The short life span is only about 5 months (Epson), and the long life span is about 3 years. This article is the whole content of "What should I pay attention to when buying a new UV flatbed printer nozzle?", I hope to help you.
