The ink in the bottle printer dries out and requires ultraviolet radiation from a UV lamp.Therefore,if the power of the ultraviolet UV lamp is low,the drying speed of the uv ink will become slower,or even not dry ideally.In this article,the Dacen editor will talk about how to maintain the UV lamp of the bottle printer?
How to maintain the UV lamp of the bottle printer?
1.Pay attention to cleaning the surface of the printer uv etc.
After a long time of use,the reflector of the UV lamp will become dirty,which will result in the loss of the reflected energy of the UV lamp(the reflected energy can account for about 50%of the power of the UV lamp),so it is necessary to pay attention to the cleaning of the surface of the UV lamp of the bottle UV printer；
2.Familiar with the life of the uv lamp used
All UV lamps have an effective service life(generally 800-1000 hours).When the service life of the UV lamp exceeds its service life,even if the UV lamp can continue to work,its utilization value has been greatly reduced,so the operator should usually pay attention to these purple-line UV lamps that exceed the service life,when needed To be actively replaced;
3.Pay attention to the timer
Once the UV IV lamp is replaced,it is necessary to check whether the use timer of the UV UV lamp has returned to its original position.If not,it may cause the use of the UV lamp to exceed its service life and cause curing problems for the bottle UV printer.
4.Pay attention to cleaning the surface of the bottle printer uv etc.
After the bottle UV printer is used for a long time,the reflector of the UV lamp will become dirty,which will result in the loss of the reflected energy of the UV lamp(the reflected energy can account for about 50%of the power of the UV lamp),so you need to pay attention to the cleaning of the surface of the UV lamp.
