How to clean the cylinder printer products?Sometimes the printing effect is not satisfactory or the customer's screen is printed incorrectly.At this time,in order not to waste materials,it may be necessary to clean the screen that has been printed.At this time,it is usually treated with alcohol.When we were printing products,we found that the printed results were not very good,but what should we do if the ink is dry and cannot be easily scraped off?This requires the use of alcohol.The alcohol gram will moisten the dried ink,so that the ink on the product can be scraped off and the product can be restored.
One.How to clean the cylinder printer products?
1.When the weather is cold and not in winter,because the temperature is too low,static electricity will be generated,especially for glass and steel,which are more likely to have a lot of dust attached to the sample due to static electricity,so we need to use alcohol Wipe it to prevent it from being"persecuted"by static electricity so that the printed sample is covered with granular"unidentified objects".The effect of alcohol is not limited to this,and there are many uses that we need to dig in the process of use,reasonable The use of alcohol to print lifelike products.
2.The sample material with dust and particles on the surface,because the dust and particles will directly adhere to the sample as the printer ink dries out and affect the quality and appearance of the sample,so we need to wipe it with alcohol.
Two.Summary of the cylindrical UV printer manufacturer Dacen
How to clean the cylinder printer products?Basically,it can be achieved by cleaning with alcohol bubbles.There are also special detergents,most of which use alcohol.
