Plastic Printer With Anti-static System High Speed
The advanced print head TOTHIBA CE4M - a wonderful combination of quality and reliability! With high incidence rates of injection (28 kHz) , Excellent resolution( ink drop size range from 5pl to 42pl),the printer effect and print speed are ensured strictly. thanks to its Wide applicability, this UV flatbed printer can work in many fields, and print some media directly, like textile, garments, glass, ceramic, metal, wood, porcelain, Floor, plastic board, Acrylic, KT board, Slate, Metal, Stone, Leather, etc bigger size rigid and flexible materials, with more excellent color fastness, and scratch-resistance ability. it will match with your requirements of printing.Send InquiryChat Now
Plastic printer with anti-static system high speed
UV flatbed printer refer to adopt piezoelectric inkjet technology to spray ink to the surface of medium with high speed and high resolution. Equipped automatic stirring device increase the automatic cycle of ink and enhance influent of white ink. The straight- line mute rail ensure the printer work more quite, stable and in high accuracy .Our UV flatbed printer can be widely used for printing on almost all kinds of plastic such as Phone case, U disk surface, Acrylic, Name card, Disc, Cosmetic box, Crystal, office stationary.
|Machine||UV FLATBED PRINTER|
|Print Head Quantity||4~10pcs|
|Machine Size||3894mm ×3890mm×1300mm|
|Print Head||TOSHIBA CE4M|
|Ink Type||UV ink|
|Print Speed||Draft mode:34m2/h|
|High resolution mode:18m2/h|
|Cleaning System||Auto positive pressure cleaning|
|Environment Requirement||Temperature:20~30℃ Humidity：40%~60%|
|Power Requirement||AC220 P2500|
|Curing System||Imported UV LED lamp|
|RIP Softwarte||Ultra print, GMG,Photoprint|
|Substrate material||Wood,glass,aliminum,metal,marble,plastic,ceramic tile,PVC,ABS,PC,canvas,PU,bamboo,nonwoven fibre,stone,etc.|
|Certification||CE RoHS SGS|
|Package size（2 packages）||Machine head:4055mm×750mm×900mm|
|Machine weight after packing||1600KG|
1.How to make 3D effect texture?
Can through two ways to reach 3D feeling: One is change media, by engrave to reach embossed feeling, then print by WER printers, second is through WER 3D printing technology, to accumulate UV ink to reach 3D effect. The 3D range will be bigger when use first ways; the second way have the height limit, and this way can re-print to reach more 3D effect, e.g. Mountain, use the second way can reach more Layering.
2.How much will cost for printing one square meters?
We can calculate the cost according to the price of ink,each litre ink can print 80-120 sqm.
3.How to move the machines?
UV printers belong to precise instrument, when you move them, please turn off all power, remove the cartridges and waste cartridge, keep other parts on the printer, and handle with care, keep shaking and heavy goods away from the printer.
4.How to maintain the printer if couple of days no using the printer?
If the printer won't use more than 5 days, you must cleaning out all ink in the printhead, otherwise, the ink will be dry because the solvent volatilization, even cause irreversible damage for the nozzles of the printhead. Below is the solving methods:
A.Turn off the power of the printer
B.Move the printhead to the cleaning position, put a corrosion resistant container below the printhead for filling the waste cleaning solution.
C.Unplug the printhead from the ink damper, then using the special cleaning solution to cleaning the printhead by glass syringe, and do this some times, at last do not suction out all cleaning solution from the printhead, put enough cleaning solution in the inner of the printhead, because the printhead can keep the nozzles moisture.
D.Please put the printhead into the clean container and seal it.